Toro Commercial 121-1869 Flail Blade
0.08 lbs.
Description...
Hide
When installing a new Blade, or Cutter, you may notice that the cutting edge has been pre-sharpened but then painted over. This paint is a safety measure to protect the installer from injury during installation. This paint will come off quickly during initial operation and should not be otherwise removed. For added safety, when installing a blade on a walk-behind mower, you might consider disconnecting the Spark Plug wire to prevent accidental engine ignition. Please handle all blades with extra caution.
$6.49
$
Usually ships in 3-6 days
Often Bought with this Part
Models that Use this Part
Your part was not found on any models.
- If you feel this is in error or desire further assistance, please call us!
23513 - Toro 18" Dethatcher (SN: 312000001 - 312999999) (2012)
BEARING AND SHAFT ASSEMBLY
23513 - Toro 18" Dethatcher (SN: 313000001 - 313999999) (2013)
BEARING AND SHAFT ASSEMBLY
23513 - Toro 18" Dethatcher (SN: 314000001 - 314999999) (2014)
BEARING AND SHAFT ASSEMBLY
23513 - Toro 18" Dethatcher (SN: 316000001 - 316999999) (2016)
BEARING AND SHAFT ASSEMBLY
23513 - Toro 18" Dethatcher (SN: 400000000 - 999999999)
BEARING AND SHAFT ASSEMBLY
33513 - Toro 18" Dethatcher (SN: 312000001 - 312999999) (2012)
BEARING AND SHAFT ASSEMBLY
33513 - Toro 18" Dethatcher (SN: 313000001 - 313999999) (2013)
BEARING AND SHAFT ASSEMBLY
33513 - Toro 18" Dethatcher (SN: 314000001 - 314999999) (2014)
BEARING AND SHAFT ASSEMBLY
33513 - Toro 18" Dethatcher (SN: 315000001 - 315999999) (2015)
BEARING AND SHAFT ASSEMBLY
33513 - Toro 18" Dethatcher (SN: 316000001 - 316999999) (2016)
BEARING AND SHAFT ASSEMBLY
33513 - Toro 18" Dethatcher (SN: 400000000 - 405799999)
Bearing and Shaft Assembly
33513 - Toro 18" Dethatcher (SN: 405800000 - 411799999)
Bearing and Shaft Assembly
