Exmark 121-1931 Cutting Blade for Seeder
0.92 lbs.
Description...
Hide
When installing a new Blade, or Cutter, you may notice that the cutting edge has been pre-sharpened but then painted over. This paint is a safety measure to protect the installer from injury during installation. This paint will come off quickly during initial operation and should not be otherwise removed. For added safety, when installing a blade on a walk-behind mower, you might consider disconnecting the Spark Plug wire to prevent accidental engine ignition. Please handle all blades with extra caution.
$23.99
$
Usually ships in 3-6 days
Often Bought with this Part
Models that Use this Part
Your part was not found on any models.
- If you feel this is in error or desire further assistance, please call us!
SD270SB20 - Exmark 20" Slicer Seeder (SN: 313000000 - 313999999) (2013)
Shaft Assembly No. 126-0034
SD270SB20 - Exmark 20" Slicer Seeder (SN: 314000000 - 314999999) (2014)
Shaft Assembly No. 126-0034
SDS270CSB20000 - Exmark 20" Slicer Seeder (SN: 315000000 - 315999999) (2015)
Shaft Assembly No. 126-0034
SDS270CSB20000 - Exmark 20" Slicer Seeder (SN: 316000000 - 399999999) (2016)
Shaft Assembly No. 126-0034
SDS270CSB20000 - Exmark 20" Slicer Seeder (SN: 400000000 - 402082299) (2017)
Shaft Assembly No. 126-0034
